(+91) 9830019218

Breakers

CAT demolition tools are built to deliver the power durability necessary for variety of construction and plant maintenance application, such as breaking reinforced concrete, heavy road works, tarmac cutting and general demolition work.

Features

- Alloy steel forging provide excellent durability.
- Air Inlet swivel improves maneuverability.
- Heavy head springs reduce reaction back to operator.
- Teasing Throttle - for precise control.

Model No. Min. water depth mm Water discharge mm Height w/o valve mm Overall height mm Operating pressure psi Net weight kg. Air inlet mm min. hose size inch Motor power
CAT 201 22 50 340 450 90 15.8 20 3/4" 3 H.P.
CAT 202. 22 62.5 300 410 90 27.3 25 1" 4 H.P.

Sump Pumps

CAT rammers are rugged and dependable tools to give you years of satisfactory services. These simple floor and bench rammers are intended for ramming of casting pits, core boxes, large mould, and casting pits or for tamping work, for instance with filling sand and stamping of refractory furnace linings.

Features

- Single stage centrifugal units driven by powerful vane motor. Double Seals protect bearings and motor from water and mud.
- Integral oiler provides continuous lubricator.
- Integral Strainer, air inlet valve Bronze impeller, cast - iron housing.
- Performance 930 - 400 l/min at 90 feet of CAT 201. & 1230 - 400 l/min at 90 feet of DT 202

Model No. Min water depth mm Water discharge mm Height w/o valve mm Overall height mm Operating pressure psi Net weight kg. Air inlet Min. hose size Motor power
CAT 201 22 50 340 450 90 15.8 20 3/4" 3 H.P.
CAT 202 2 62.5 300 410 90 27.3 25 1" 4 H.P.

Riveting Hammer

CAT offers one of the most comprehensive range of Riveting Hammer. They are powerful & versatile most suited for riveting.

Features

- Rugged construction - harened steel piston, cylinder & handle.
- Teasing throttle for precise control.

Model No. Riveting capacity in steel (Hot) mm Blows per minute bpm Handle type Length in mm Operating pressure psi Approx. weight kg. Air inlet inch min. hose size inch
CAT 3005 20 1500 Straight 430 90 7.6 1/2" 3/4"
CAT 3006 24 1300 Straight 470 90 8.6 1/2" 3/4"
CAT 3007 30 1200 Straight 525 90 9.4 1/2" 3/4"

Holder On (Dolly Machine)

CAT Holders-On are built to buck up rivets against the hardest blow of the hammer, insuring a strongly riveted joint and a completely filled rivet hole. Rivet heads are not mutilated, as there is no inclination to jump. Another advantage of using these holders-on is the fact that they speed up the riveting operation.

Features

- Alloy steel harden cylinder & piston provide excellent durability.
- Bucket with piston o ring gives extra support during riveting.

Model No. Rivet holding capacity in mm Feeding length mm Length retracted mm Total length extracted mm Operating pressure psi Approx. weight kg. Air inlet inch min. hose size inch
CAT 600 16-25 130 132 232 90 6.5 1/2" 1/2"
CAT 400 16-25 100 100 175 90 4.9 1/2" 1/2"

Rock Drills

CAT Rock Drills are the ideal tools for all your drilling operations. Their streamlined design incorporates smooth contours, a side exhaust and a flat back that makes them easy to handle in query, mine & general executive work. Working parts are constantly protected with an effective lubricating System.

Features

- Diameter Holes with H22 integral extension steels up to depth of 6 Meters.
- Forged steel Housing withstands rugged use.
- Good penetration in hard & soft rocks.
- Robust kick latch type retainers.
- Air Inlet swivel improves maneuverability.
- High Power to weight ratio.
- Adjustable flushing air valve for simple and rapid flushing.
- Ideal for work in confined spaces.

Model No. Impact frequency (blows/sec.) Drill steel chuck hex Rotation speed rpm Piston bore mm Stroke length mm Hole range size mm Length in mm Air requirement at 90(PSI) CFM Approx weight Kg. Min. hose size
CAT 556 30 22 X 108 215 65 60 27 - 40 640 110 25 3/4"
CAT 556L 30 22 X 108 215 65 60 27 - 40 640" 110 24 3/4"
CAT 555W 30 22 X 108 215 65 60 27 - 40 725 102 26 3/4"

Pusher Leg

CThis tools are widely used for drilling and tunneling operations. Feed Pressure is controlled by a hand operated valve at the air inlet keeping the maintenance cost to lowest level. A push button operated valve allow momentary of simple, robust design for reliable operation and require minimum maintenance.

Model No. Suitable for rock drill Feeding length mm Length retracted mm Length extracted Piston bore mm Operating pressure psi Approx. weight kg. Min. hose size
CAT 6200 CAT 555W 1300 1815 3115 53 90 17 1/2"

Accessories

Steel for pneumatic tools are manufactured from low carbon steel, combining the benefits of a case hardened skin without the risks core brittleness. We end mill the striking face of the products. True contact, between the piston and the striking end of the tool is the only way to minimize vibration and excessive wear on both Hammer and accessory at the same time as transmitting the maximum blow energy to the work place. Only use of this method are the most beneficial.

Features :

- End milled striking face-minimizes vibration and excessive wear transmits maximum blow energy.
- Forged under traditional heavy hammers -ensures greater strength and durability.